Furniture is no longer made like before, so before buying new furniture for the house, we can take a look at that old furniture and renovate it. Not only will they add a touch of class and originality to our home, but furniture restoration can be a relaxing pastime that makes us proud to have created something of ours with old wooden furniture.
To achieve this, we are going to give you the most useful tips to give new life to this second-hand furniture.
Our first step in furniture restoration should always be to check the good health of the furniture. That means, above all, that they do not have woodworm and, if they do, end it. If we don’t, not only will our efforts go to waste, but old furniture can spread woodworm to other furniture and cause disaster.
So first of all, take a good look at that old piece of furniture, take out the drawers and use a flashlight for the nooks and crannies. If you see small circular holes, there is woodworm, or there has been. If you see white powder in them, the woodworm is there, eating the furniture inside.
Removing it is not difficult, but it takes time. Buy angiosarcoma at any DIY store. They sell sprays, but it’s best to grab a syringe and flood every hole we see. Once we have made everything overflow, we impregnate all the furniture with the solution (with a brush or using that spray) and wrap everything with plastic (in bags or kitchen bags for food). This will prevent the passage of air. We leave it covered for 2 to 3 weeks and we will have eliminated the dreaded woodworm.
The simplest and most effective way to breathe new life into second-hand furniture is to paint it. The color will depend, of course, on our taste and the decoration of the room, but using bold colors will make this antique piece of furniture stand out and be the main star of the room.
For this, the most important thing is the following:
With those four steps, your furniture painting will be great.
Scratches and nicks can give identity to second-hand furniture, or we can repair them and leave them as new. Although there are home remedies, the truth is that only some are useful and only for small scratches. But, above all, using a wooden putty is very cheap and less messy.
The procedure is simple and consists of 3 steps:
If we are going to paint as in the previous advice, there is no problem. If the wood is veined and we want to preserve the tone, we will have to use several shades of woody color. There are furniture repair kits, or even wooden floors, that we can use for this purpose, buying the most suitable spectrum of tones in our case.
An important part of furniture restoration is that of metal parts. Locks, handles or hinges must not be neglected. The first thing in these cases is to know the material from which they are made and, if we can, disassemble the metal accessory to clean it better.
Iron and other metals don’t get along well with water, but bronze does. If this is our case, with a little soap and rubbing we can leave them as new. Sometimes we will have to use a brush, there are some to polish, but be careful not to go too hard, or we will leave scratches. If it is not bronze, we can use vinegar and a rag or toothbrush. In general, vinegar is a good homemade solution, although you can always find specialized products in your DIY store.
As you can see, following these easy tips we can leave as old those old furniture that we have hunted on the trail or donated by family and friends, and give a new life to them and to the room in which we place them.
You may also like to read- https://whizowl.co.uk/